MX500 5-AXIS MACHINING CENTER

The overall design of the machine tool uses finite element analysis. The casting box is designed with a five-point support structure and is integrally formed using resin sand technology, which minimizes structural defects such as stress deformation and processing heat deformation of the machine tool. The material is made of HT300 high-strength cast iron, which has been tempered twice and artificially aged to effectively ensure the overall accuracy and quality of the machine tool and product quality.

PRODUCT ADVANTAGES
The overall design of the machine tool uses finite element analysis. The casting box is designed with a five-point support structure and is integrally formed using resin sand technology, which minimizes structural defects such as stress deformation and processing heat deformation of the machine tool. The material is made of HT300 high-strength cast iron, which has been tempered twice and artificially aged to effectively ensure the overall accuracy and quality of the machine tool and product quality.

01

The machine tool adopts a BC structure design with a three-axis stroke of 650/450/475mm, which effectively increases the maximum space for five-axis simultaneous processing and reduces the possibility of component collisions during rotation.

02

The maximum moving speed of the machine tool can reach 24/24/24m/min (X/Y/Z), and the spindle speed can reach 15000rpm. The entire process uses roller guide rails and Taiwanese brand ground double-nut ball screws, and both ends of the screw are pre-stretched. , eliminate the loss of precision caused by thermal elongation, and use precision screw support bearings to form a stable and high-rigidity mechanical transmission system. Improves the rigidity and stability during processing, and improves the machine tool's rapid response capability.

03

The machine tool comes standard with a 30-position tool magazine, the tool changing time is stable at 7 seconds, and the operation is safe and reliable.

TECHNICAL DATA